Every project comes down to cost, so it only makes sense to start there. According to our garage remodeling cost estimator, the average garage remodel runs $8,582. Keep in mind, this takes the full garage into consideration. That includes the garage door, flooring, windows and plenty of other renovations. For those remodeling one aspect of their garage, of course, expect the final price to be much less. In fact, we have even seen garage remodels cost as low as $900.
On the exterior we remove the siding on the front of the garage and installed new hardboard siding that matched the original on the building. Electrically we removed and relocated existing lights and added a ceiling fan as well as recessed lighting. Some additional outlets and network wiring was installed then connected to the home and panel box. The interior was insulated in areas such as the ceiling, stairwell and miscellaneous sections of the walls. We laminated (overlay) the existing sheetrock with 3/8″ wallboard on the sidewalls and stairwell and 1/2″ for the ceiling.
A garage can be so much more than a messy catch-all for items that don’t fit inside the home. Through a remodel, it can be made into an organized storage unit or a workshop, or simply made more functional, with room for at least one car. Turning a standard 600-square-foot, two-car garage into a well-organized, tidy space is less expensive than most remodeling projects. Because a garage already has a floor, walls and a roof, the primary tasks are finishing the framed walls and adding organizational systems.
We are extremely satisfied with our choice to use Dots Remodeling. We spent several days looking at colors where they presented multiple options for us to choose from. They are professional and very patient as they worked. on our exterior house paint job. Not only did they meet the expectations set by neighbors who had worked with them in the past, they also went above and beyond to exceed them. From start to finish, Dots demonstrated their professionalism, expertise, customer service, and true passion for their business. It is clear that their true purpose is to ensure their client���s complete satisfaction. They put in the time, effort, and energy to ensure that they accomplish this goal.
I just finished "re-modeling" my garage...before I touched it it had just taped drywall and concrete block walls, unfinished cement floor, wires for the garage door openers hanging all over the place, holes in all the walls/ceiling. It was a typical, dirty, dark garage.I painted the concrete walls with Behr waterproof masonry paint and the rest of the walls and ceiling with the same color behr paint (twilight gray-to lighten it up).I did the floor with Behr 1 Part Epoxy, which, takes forever to prep for, but the result is worth it. You first need to sweep very good, then clean/de-grease and etch the concrete using a floor cleaner rented from HD...then let it dry. I let it dry for about 2 weeks. Once I was sure the concrete was dry, I applied 2 coats of concrete bonding primer. I let that dry for about 24 hours, and I was finally ready for the paint. The paint goes on easy, one coat was plenty. I sprinlled in some color flakes and let it dry 24hrs. I then began my first of three coates of low gloss sealer. The finished result was very pleasing...I then re-installed my Gladiator Garage Works 8 foot work bench, wall cabinet and tool chest as well as a second wall cabinet and large gearbox that I purchased for my new garage... I also built a wooden cabinet around the circuit breakers and painted it gray along with the framing for the garage doors, a beam in the middle and the door into the house. I finished with gray vinyl trim molding around the walls.I also mounted the bikes, a shop Vac and misc. brooms, saw horse, etc... on the wall(s). All of the wires from the garage door openers were hanging down and sloppy (prev. owner) so I disconected everything and ran it through PVC for a cleaner look. I then added a few finishing touches, Bud Light neon clock, pictures (NE Patriots Cheerleaders), and mounted my novelty license plate collection as well as a few other items...Moving all of my furniture/tools out of the garage was a big project in itself, and I lost my basement(i.e. Gym) for about a month and a half, but the end result is a very clean, organized garage that is "my" place...
A full-scale apartment or guest house will take you to the top of your budget and beyond at an average between $15,000 to $30,000. You'll need to make all the upgrades mentioned for a family room, along with a separate bath and kitchen. You'll need to run a gas line or a 220 outlet for the stove. You'll also want a private entrance for your apartment, which usually entails adding a fire door.
You may have to drill holes through studs or through the top plate of walls to reroute wires. If so, be sure to center the holes on the stud. If the plastic-sheathed cables are too short to reach the next box when you reroute them, you can add a junction box and splice on a length of cable. The new box must be accessible either in the attic space or through a blank cover on the wall or ceiling.

Every project comes down to cost, so it only makes sense to start there. According to our garage remodeling cost estimator, the average garage remodel runs $8,582. Keep in mind, this takes the full garage into consideration. That includes the garage door, flooring, windows and plenty of other renovations. For those remodeling one aspect of their garage, of course, expect the final price to be much less. In fact, we have even seen garage remodels cost as low as $900.
I just finished "re-modeling" my garage...before I touched it it had just taped drywall and concrete block walls, unfinished cement floor, wires for the garage door openers hanging all over the place, holes in all the walls/ceiling. It was a typical, dirty, dark garage.I painted the concrete walls with Behr waterproof masonry paint and the rest of the walls and ceiling with the same color behr paint (twilight gray-to lighten it up).I did the floor with Behr 1 Part Epoxy, which, takes forever to prep for, but the result is worth it. You first need to sweep very good, then clean/de-grease and etch the concrete using a floor cleaner rented from HD...then let it dry. I let it dry for about 2 weeks. Once I was sure the concrete was dry, I applied 2 coats of concrete bonding primer. I let that dry for about 24 hours, and I was finally ready for the paint. The paint goes on easy, one coat was plenty. I sprinlled in some color flakes and let it dry 24hrs. I then began my first of three coates of low gloss sealer. The finished result was very pleasing...I then re-installed my Gladiator Garage Works 8 foot work bench, wall cabinet and tool chest as well as a second wall cabinet and large gearbox that I purchased for my new garage... I also built a wooden cabinet around the circuit breakers and painted it gray along with the framing for the garage doors, a beam in the middle and the door into the house. I finished with gray vinyl trim molding around the walls.I also mounted the bikes, a shop Vac and misc. brooms, saw horse, etc... on the wall(s). All of the wires from the garage door openers were hanging down and sloppy (prev. owner) so I disconected everything and ran it through PVC for a cleaner look. I then added a few finishing touches, Bud Light neon clock, pictures (NE Patriots Cheerleaders), and mounted my novelty license plate collection as well as a few other items...Moving all of my furniture/tools out of the garage was a big project in itself, and I lost my basement(i.e. Gym) for about a month and a half, but the end result is a very clean, organized garage that is "my" place...
We first used Crown Exteriors 2 years ago to repair some wood siding and do external painting. We were very happy with the end result that we decided to use them again when we needed windows replaced now. They are reliable and do what they say they will. In addition, they are reasonably priced and just do great work for the cost. Would use them again if we have another need arise.

Homeowners who are used to house paints should have no trouble applying either and cleaning up afterward. First, apply some H&C cleaner degreaser, a mixture of heavy-duty detergent and phosphoric acid. You simply sprinkle it on the garage floor with a watering can, work it in with a broom and let it foam the floor clean. Then, rinse the floor and let it dry. The stain is applied with a roller. It's ready for foot traffic in one hour and car traffic in 72 to 96 hours depending on temperature and humidity.
I just finished "re-modeling" my garage...before I touched it it had just taped drywall and concrete block walls, unfinished cement floor, wires for the garage door openers hanging all over the place, holes in all the walls/ceiling. It was a typical, dirty, dark garage.I painted the concrete walls with Behr waterproof masonry paint and the rest of the walls and ceiling with the same color behr paint (twilight gray-to lighten it up).I did the floor with Behr 1 Part Epoxy, which, takes forever to prep for, but the result is worth it. You first need to sweep very good, then clean/de-grease and etch the concrete using a floor cleaner rented from HD...then let it dry. I let it dry for about 2 weeks. Once I was sure the concrete was dry, I applied 2 coats of concrete bonding primer. I let that dry for about 24 hours, and I was finally ready for the paint. The paint goes on easy, one coat was plenty. I sprinlled in some color flakes and let it dry 24hrs. I then began my first of three coates of low gloss sealer. The finished result was very pleasing...I then re-installed my Gladiator Garage Works 8 foot work bench, wall cabinet and tool chest as well as a second wall cabinet and large gearbox that I purchased for my new garage... I also built a wooden cabinet around the circuit breakers and painted it gray along with the framing for the garage doors, a beam in the middle and the door into the house. I finished with gray vinyl trim molding around the walls.I also mounted the bikes, a shop Vac and misc. brooms, saw horse, etc... on the wall(s). All of the wires from the garage door openers were hanging down and sloppy (prev. owner) so I disconected everything and ran it through PVC for a cleaner look. I then added a few finishing touches, Bud Light neon clock, pictures (NE Patriots Cheerleaders), and mounted my novelty license plate collection as well as a few other items...Moving all of my furniture/tools out of the garage was a big project in itself, and I lost my basement(i.e. Gym) for about a month and a half, but the end result is a very clean, organized garage that is "my" place...
Know your priorities. Will your garage be purely functional? If so, durable surfaces and systems trump expensive trappings. Make a list of what you’ll need, from storage to appliances to furnishings, and then rank every item in order of importance. That way, if you have to cut things as you get farther into the process, it will be easier to make choices.
There are certain garage remodel facts that apply to almost every project. Rather than you spending your day digging them out of the corners of the internet, we have put them together for you. These quick facts will let you make some informed decisions. Even if these facts don’t help you make decisions, they will give you a better knowledge base as you begin.
The overhead garage door can be a big source of drafts and heat loss. Recently installed doors usually include a weather-stripped stop around the perimeter. But older doors may be lacking a weather strip. Luckily, it’s an easy fix. Garage door weather stripping is available at home centers and hardware stores, and installation is straightforward. If your overhead door is uninsulated, search online for “garage door insulating kits.”

Is your garage currently only being used for storing things? Well, if it is, maybe you should consider putting it to better use. This article will explore the many possibilities a garage could give you, how to remodel it, and how to make sure you don’t break the bank doing it. We’ve divided it into different sections, each can be accessed through the links below, or you can simply scroll in order to read it in its entirety.
Before launching a project, the homeowner should draw up a plan that takes into account the various ways the garage could ideally be used. GarageAbility, for instance, will divide a garage into zones for storing garden equipment, sporting goods and tools as well as space for working on hobbies, then help the homeowner determine the storage systems that will work best for their belongings.
If the concrete slab in the garage is the problem, there are more cost-effective solutions than a concrete mason. Most cracking, flaking, stains, pitting or wear can be easily fixed by calling a concrete specialist to apply either an inexpensive epoxy or polyurethane-based coating. These seals are very durable and can make your garage floor look brand new.
×