I just finished "re-modeling" my garage...before I touched it it had just taped drywall and concrete block walls, unfinished cement floor, wires for the garage door openers hanging all over the place, holes in all the walls/ceiling. It was a typical, dirty, dark garage.I painted the concrete walls with Behr waterproof masonry paint and the rest of the walls and ceiling with the same color behr paint (twilight gray-to lighten it up).I did the floor with Behr 1 Part Epoxy, which, takes forever to prep for, but the result is worth it. You first need to sweep very good, then clean/de-grease and etch the concrete using a floor cleaner rented from HD...then let it dry. I let it dry for about 2 weeks. Once I was sure the concrete was dry, I applied 2 coats of concrete bonding primer. I let that dry for about 24 hours, and I was finally ready for the paint. The paint goes on easy, one coat was plenty. I sprinlled in some color flakes and let it dry 24hrs. I then began my first of three coates of low gloss sealer. The finished result was very pleasing...I then re-installed my Gladiator Garage Works 8 foot work bench, wall cabinet and tool chest as well as a second wall cabinet and large gearbox that I purchased for my new garage... I also built a wooden cabinet around the circuit breakers and painted it gray along with the framing for the garage doors, a beam in the middle and the door into the house. I finished with gray vinyl trim molding around the walls.I also mounted the bikes, a shop Vac and misc. brooms, saw horse, etc... on the wall(s). All of the wires from the garage door openers were hanging down and sloppy (prev. owner) so I disconected everything and ran it through PVC for a cleaner look. I then added a few finishing touches, Bud Light neon clock, pictures (NE Patriots Cheerleaders), and mounted my novelty license plate collection as well as a few other items...Moving all of my furniture/tools out of the garage was a big project in itself, and I lost my basement(i.e. Gym) for about a month and a half, but the end result is a very clean, organized garage that is "my" place...

The extras on a garage often get short attention, but those little details can make a big impact. Take lighting and house numbers: Choices more in step with your garage's style can tie together paint, materials, and more. Use proportion as your guide when selecting fixtures: Low-slung styles such as this garage work better with small to medium fixtures.

We had a great experience with Shane. He was hired for an exterior house painting, a 40's craftsman with varying ages of wood siding. He was honest with his assessment of the job, very confident with his work and was flexible with taking care of other small odds and ends while he and his team painted. I really appreciated that he was on-site with his team for the entirety of the job, so I knew that every nook and cranny we discussed would be taken care of with his oversight (not something you get with most contractors who have teams). He paid attention to detail, and had no issue working through and fixing based on multiple rounds of feedback. Our house was a challenging job, and he was not averse to doing whatever he had to do to make sure the quality was up to snuff. Whether it be paint upgrades, hours of sanding/chipping, and multiple do-overs in various areas. The communication took a little to get going, but we spoke generally every day and I had ample updates from him along the way. Would recommend highly!
The overhead garage door can be a big source of drafts and heat loss. Recently installed doors usually include a weather-stripped stop around the perimeter. But older doors may be lacking a weather strip. Luckily, it’s an easy fix. Garage door weather stripping is available at home centers and hardware stores, and installation is straightforward. If your overhead door is uninsulated, search online for “garage door insulating kits.”
Waterproof paint (for concrete walls) • Paint (dry wall) • Behr concrete cleaner (2 Gal) • Behr Concrete Etcher (2 Gal) • Behr Concrete Bonding Primer (1 Gal) • Behr 1-Part Epoxy Paint (2 Gal.) • MiscPainting Supplies • Stainless steel light switch/receptical covers • Lumber for cabinet over circuit breakers • Gladiator Garage Works workbench-Wall cabinets-tall cabinet • Hooks for bicycles/tools • Tapcon masonary drill bits • PVC (to run wires for garage door openers
Your garage remodeling project isn’t necessarily the easiest endeavor. Too often a homeowner will just forge ahead with a great idea and hope it turns our alright. Needless to say, this is not often the case, most remodels do not go easily. Even if you think of a good plan, it probably is missing something. Trust us, unless you are a professional contractor, you haven’t thought of everything. Our tips will make you look like you have done this a thousand times.
You may have to drill holes through studs or through the top plate of walls to reroute wires. If so, be sure to center the holes on the stud. If the plastic-sheathed cables are too short to reach the next box when you reroute them, you can add a junction box and splice on a length of cable. The new box must be accessible either in the attic space or through a blank cover on the wall or ceiling.
And you really need your investments protected, but you just don’t have the funds to build some of these other options. Well, don’t give up hope. This video shows you how to build a pretty decent structure that will do what you need it to do for basically no money. And honestly, if you have the materials on hand it could actually be built for free.

Waterproof paint (for concrete walls) • Paint (dry wall) • Behr concrete cleaner (2 Gal) • Behr Concrete Etcher (2 Gal) • Behr Concrete Bonding Primer (1 Gal) • Behr 1-Part Epoxy Paint (2 Gal.) • MiscPainting Supplies • Stainless steel light switch/receptical covers • Lumber for cabinet over circuit breakers • Gladiator Garage Works workbench-Wall cabinets-tall cabinet • Hooks for bicycles/tools • Tapcon masonary drill bits • PVC (to run wires for garage door openers


Another problem is moisture vapor. Moisture vapor from the ground works from below to loosen the coating's bond with the concrete. In the case of alkyd paints (also called oil-based paints), the moisture will react with the alkaline materials in the concrete and form a soap. This process is called saponification. The soap loosens the paint's bond with the concrete. Never use alkyd or modified alkyd paints on concrete.
Waterproof paint (for concrete walls) • Paint (dry wall) • Behr concrete cleaner (2 Gal) • Behr Concrete Etcher (2 Gal) • Behr Concrete Bonding Primer (1 Gal) • Behr 1-Part Epoxy Paint (2 Gal.) • MiscPainting Supplies • Stainless steel light switch/receptical covers • Lumber for cabinet over circuit breakers • Gladiator Garage Works workbench-Wall cabinets-tall cabinet • Hooks for bicycles/tools • Tapcon masonary drill bits • PVC (to run wires for garage door openers
×