Waterproof paint (for concrete walls) • Paint (dry wall) • Behr concrete cleaner (2 Gal) • Behr Concrete Etcher (2 Gal) • Behr Concrete Bonding Primer (1 Gal) • Behr 1-Part Epoxy Paint (2 Gal.) • MiscPainting Supplies • Stainless steel light switch/receptical covers • Lumber for cabinet over circuit breakers • Gladiator Garage Works workbench-Wall cabinets-tall cabinet • Hooks for bicycles/tools • Tapcon masonary drill bits • PVC (to run wires for garage door openers

Determine needs vs wants: There is always a difference between what you WANT in your garage, and what you NEED. While you may want a high end entertainment complex, do you need it? Before you begin your project sit down and make a list of needs, and wants. By creating a prioritized list you keep yourself from overspending. Once you have your needs addressed, throw in a few wants.
Simple garage remodeling projects such as clearing a stain, adding insulation or repairing a garage door opener can be completed by active DIYers. However, if you’re converting your garage into a living area or adding any electrical or HVAC to the space, you should hire a professional. Piping, electricity and garage door springs are dangerous if handled incorrectly. Furthermore, simple mistakes garage pros do not make could end up costing you more in the long run. Therefore, play it safe and get a few quotes from garage pros before you start any garage remodeling project.

Although many people use it as the catch-all of the house, the garage offers valuable storage and potential living space that can often be more effectively used with a remodel. Some people remodel the garage to turn it into an extra bedroom or living space, while others remodel it to make it more functional as a storage and workspace. Total cost depends on the size of the garage, age of the house, and the remodel purpose, but you can plan to spend an average of $6500 for a garage remodel with a common 600 square foot garage into a more functional space. Although it is possible to remodel a garage yourself, especially for smaller projects, hiring a professional contractor is always recommended.
I just finished "re-modeling" my garage...before I touched it it had just taped drywall and concrete block walls, unfinished cement floor, wires for the garage door openers hanging all over the place, holes in all the walls/ceiling. It was a typical, dirty, dark garage.I painted the concrete walls with Behr waterproof masonry paint and the rest of the walls and ceiling with the same color behr paint (twilight gray-to lighten it up).I did the floor with Behr 1 Part Epoxy, which, takes forever to prep for, but the result is worth it. You first need to sweep very good, then clean/de-grease and etch the concrete using a floor cleaner rented from HD...then let it dry. I let it dry for about 2 weeks. Once I was sure the concrete was dry, I applied 2 coats of concrete bonding primer. I let that dry for about 24 hours, and I was finally ready for the paint. The paint goes on easy, one coat was plenty. I sprinlled in some color flakes and let it dry 24hrs. I then began my first of three coates of low gloss sealer. The finished result was very pleasing...I then re-installed my Gladiator Garage Works 8 foot work bench, wall cabinet and tool chest as well as a second wall cabinet and large gearbox that I purchased for my new garage... I also built a wooden cabinet around the circuit breakers and painted it gray along with the framing for the garage doors, a beam in the middle and the door into the house. I finished with gray vinyl trim molding around the walls.I also mounted the bikes, a shop Vac and misc. brooms, saw horse, etc... on the wall(s). All of the wires from the garage door openers were hanging down and sloppy (prev. owner) so I disconected everything and ran it through PVC for a cleaner look. I then added a few finishing touches, Bud Light neon clock, pictures (NE Patriots Cheerleaders), and mounted my novelty license plate collection as well as a few other items...Moving all of my furniture/tools out of the garage was a big project in itself, and I lost my basement(i.e. Gym) for about a month and a half, but the end result is a very clean, organized garage that is "my" place...

Garage floor coatings fail for a number of reasons. First, the floor is usually not clean enough to receive a coating. Years of grime have to be removed using solvents and proprietary cleaners. These are sold at paint stores, hardware stores, home centers and industrial supply houses. If the floor is really filthy, consider pressure washing. Rent a machine that produces at least 1,200 to 2,000 psi. Also, buy some grease-cutting detergent at the rental store. Along similar lines, you might consider a steam cleaner if a pressure washer is unavailable.
A garage remodel is usually much cheaper than a home renovation because the foundation, roof, and walls are already built. Many garages also have electrical and plumbing installed to some extent. The actual cost of a garage remodeling project, however, depends on what the renovated space will be used for. While a new home gym won't require much in the way of amenities, converting a garage to an office, apartment, or bedroom requires adding significantly more creature comforts.
×