An insulated garage will stay cooler in the summer and warmer in the winter. The first step is to be sure the attic is well ventilated. Check to see how many attic and roof vents you have. A good rule of thumb is a total of 1 sq. ft. (144 sq. in.) of vent opening per 300 sq. ft. of attic divided between the soffit and roof vents. For a typical 20 x 22-ft. garage, you’d need about six 4-in. x 12-in. soffit vents and two standard square roof vents. Make sure your ventilation is effective by installing vent chutes between the trusses. Vent chutes have a channel that prevents blown insulation from blocking the airflow from the soffit vents to the attic space. Plug the area under the vent with wood blocking or plastic and a chunk of fiberglass insulation to prevent wind from blowing up through the insulation or insulation from filling the soffit.
Your garage remodeling project is almost always an expensive endeavor. Take the time to find ways to save money on your garage remodel. Every remodel is a unique project. The costs can be something that easily overwhelm your idea. Your garage remodeling project can benefit from some basic ways to save money. There are cost savings that can be found in almost every aspect of your project.
Update Fixtures: If you have either old, or the most basic fixtures spend a little money and upgrade them. Utility lighting doesn’t have to be bare bulbs with an economy base. Use fixtures that fit into your garage design. Sometimes it has exterior lights, or interior lighting fixtures that just look completely out of place. Make sure you change out these fixtures to ones that fit the area.
For a garage-to-utility-room conversion, budget at least $6,000 for appliances, a utility sink, and space for sorting, folding and hanging laundry. A new utility room in place of an old garage brings convenience into your life, especially if you've spent years dragging loads of laundry up and down the stairs. This conversion will cost a bit more due to the addition of plumbing, but it'll be worth it.