Before launching a project, the homeowner should draw up a plan that takes into account the various ways the garage could ideally be used. GarageAbility, for instance, will divide a garage into zones for storing garden equipment, sporting goods and tools as well as space for working on hobbies, then help the homeowner determine the storage systems that will work best for their belongings.
If you have an existing garage in place, but no walls, floor, ceiling or finishes in place, the cost to finish your garage will be much less expensive than $10,000. Oftentimes, finished a garage entails adding a few beams or drywall. Contractors can install wooden or steal beams for a few thousand dollars. In addition, according to our drywall installation cost guide, you can purchase drywall for at little as $0.30/sf. If you hire a general contractor to install the drywall, expect to pay another $1,000. Overall, the cost to finish a garage should not exceed $5,000.
The home office will cost at least $5,000, making it one of the more affordable options when it comes to converting your garage into living space. Like a bedroom, a home office needs all the basic amenities, such as walls, floors, and a ceiling. It needs climate control and a window. This room may also require additional outlets that let you connect computers, printers and charging stations. You'll need internet access and a high-speed connection, as well as lots of storage and organization options.
Unlike many other home remodeling projects, it’s very easy to tell when you need to replace your garage door spring; your overhead garage door won’t open or perhaps more obvious, the weight of the door is off. When your spring is working correctly, you should be able to manually lift the garage door very easily. Likewise, when you open it, the garage door should not move and stay where you left it. If the garage door is very heavy or it closes as soon as you let go, then you need a new spring.
You may have to drill holes through studs or through the top plate of walls to reroute wires. If so, be sure to center the holes on the stud. If the plastic-sheathed cables are too short to reach the next box when you reroute them, you can add a junction box and splice on a length of cable. The new box must be accessible either in the attic space or through a blank cover on the wall or ceiling.
Homeowners who are used to house paints should have no trouble applying either and cleaning up afterward. First, apply some H&C cleaner degreaser, a mixture of heavy-duty detergent and phosphoric acid. You simply sprinkle it on the garage floor with a watering can, work it in with a broom and let it foam the floor clean. Then, rinse the floor and let it dry. The stain is applied with a roller. It's ready for foot traffic in one hour and car traffic in 72 to 96 hours depending on temperature and humidity.