The first step in planning a garage conversion is deciding upon the room's new intended purpose. Do you need a place for teens to hang out at home with friends? Are you dreaming of a large, luxury man cave? Maybe you'd just enjoy an upgraded space to park your cars in winter - one that's fully insulated and climate controlled? Before you decide, keep a few factors in mind:
Paint manufacturers have recognized these problems and have come to the rescue with new solutions. But a word of advice: If your garage floor sees heavy water leakage, if it's badly cracked or if it's damp and slimy all summer, don't apply any coating. In those cases, you're better off simply keeping it as clean as you can and then calling it quits.
Like wood stains, masonry stains are less viscous than paints. They soak into the masonry and don't form a film the way paint does. Unlike film-forming coatings, stains won't make your garage floor feel like the deck of an aircraft carrier. Because of this, stains are somewhat more forgiving and easier to apply and reapply as they wear off and become dirty. One of the oldest (perhaps the oldest) masonry stains available is H&C, now owned by Sherwin-Williams and sold at local paint stores. This venerable brand has been used in the Southern U.S. for many years. It's available in a wide range of colors and it can be tinted to any color you prefer. It's available in two formulations: a solvent-base (that is unavailable in California) and a waterborne acrylic available nationwide. The solvent-based formulation is the tougher one, so if you have both available, choose the stronger route unless you're very sensitive to solvent fumes.
We are extremely satisfied with our choice to use Dots Remodeling. We spent several days looking at colors where they presented multiple options for us to choose from. They are professional and very patient as they worked. on our exterior house paint job. Not only did they meet the expectations set by neighbors who had worked with them in the past, they also went above and beyond to exceed them. From start to finish, Dots demonstrated their professionalism, expertise, customer service, and true passion for their business. It is clear that their true purpose is to ensure their client���s complete satisfaction. They put in the time, effort, and energy to ensure that they accomplish this goal.

If you're planning to maximize the space, add useful features, and otherwise make changes that are likely to appeal to a majority of homeowners, your renovation may end up being a worthwhile investment in your home's resale value. However, the quality of the work matters, especially if you're planning a major change such as converting the garage into a bedroom. Trading your garage space for a poorly insulated "bedroom" with no windows and the garage door intact won't do much to boost resale value.


It’s often not enough to just make sure your garage doesn’t look bad. Sometimes you need to use this space to add some style or emphasis to your home to help it stand out from the crowd. Your first step is to look around your neighborhood at comparable properties. Look and see what they have done with theirs. The goal is to outdo your neighbors, but only just so much. You don’t want to price yourself over the market. Some upgrade options to consider are;
I just finished "re-modeling" my garage...before I touched it it had just taped drywall and concrete block walls, unfinished cement floor, wires for the garage door openers hanging all over the place, holes in all the walls/ceiling. It was a typical, dirty, dark garage.I painted the concrete walls with Behr waterproof masonry paint and the rest of the walls and ceiling with the same color behr paint (twilight gray-to lighten it up).I did the floor with Behr 1 Part Epoxy, which, takes forever to prep for, but the result is worth it. You first need to sweep very good, then clean/de-grease and etch the concrete using a floor cleaner rented from HD...then let it dry. I let it dry for about 2 weeks. Once I was sure the concrete was dry, I applied 2 coats of concrete bonding primer. I let that dry for about 24 hours, and I was finally ready for the paint. The paint goes on easy, one coat was plenty. I sprinlled in some color flakes and let it dry 24hrs. I then began my first of three coates of low gloss sealer. The finished result was very pleasing...I then re-installed my Gladiator Garage Works 8 foot work bench, wall cabinet and tool chest as well as a second wall cabinet and large gearbox that I purchased for my new garage... I also built a wooden cabinet around the circuit breakers and painted it gray along with the framing for the garage doors, a beam in the middle and the door into the house. I finished with gray vinyl trim molding around the walls.I also mounted the bikes, a shop Vac and misc. brooms, saw horse, etc... on the wall(s). All of the wires from the garage door openers were hanging down and sloppy (prev. owner) so I disconected everything and ran it through PVC for a cleaner look. I then added a few finishing touches, Bud Light neon clock, pictures (NE Patriots Cheerleaders), and mounted my novelty license plate collection as well as a few other items...Moving all of my furniture/tools out of the garage was a big project in itself, and I lost my basement(i.e. Gym) for about a month and a half, but the end result is a very clean, organized garage that is "my" place...
Besides a brand new room, there are plenty of other benefits that come with remodeling garages. First and foremost, if you simply update your garage with new flooring, windows, insulation or garage organizers, you instantly increase the value of your home. While you may not see a 100% return on investment the day you sale, you will surely get more than you would have before the garage renovation.

I just finished "re-modeling" my garage...before I touched it it had just taped drywall and concrete block walls, unfinished cement floor, wires for the garage door openers hanging all over the place, holes in all the walls/ceiling. It was a typical, dirty, dark garage.I painted the concrete walls with Behr waterproof masonry paint and the rest of the walls and ceiling with the same color behr paint (twilight gray-to lighten it up).I did the floor with Behr 1 Part Epoxy, which, takes forever to prep for, but the result is worth it. You first need to sweep very good, then clean/de-grease and etch the concrete using a floor cleaner rented from HD...then let it dry. I let it dry for about 2 weeks. Once I was sure the concrete was dry, I applied 2 coats of concrete bonding primer. I let that dry for about 24 hours, and I was finally ready for the paint. The paint goes on easy, one coat was plenty. I sprinlled in some color flakes and let it dry 24hrs. I then began my first of three coates of low gloss sealer. The finished result was very pleasing...I then re-installed my Gladiator Garage Works 8 foot work bench, wall cabinet and tool chest as well as a second wall cabinet and large gearbox that I purchased for my new garage... I also built a wooden cabinet around the circuit breakers and painted it gray along with the framing for the garage doors, a beam in the middle and the door into the house. I finished with gray vinyl trim molding around the walls.I also mounted the bikes, a shop Vac and misc. brooms, saw horse, etc... on the wall(s). All of the wires from the garage door openers were hanging down and sloppy (prev. owner) so I disconected everything and ran it through PVC for a cleaner look. I then added a few finishing touches, Bud Light neon clock, pictures (NE Patriots Cheerleaders), and mounted my novelty license plate collection as well as a few other items...Moving all of my furniture/tools out of the garage was a big project in itself, and I lost my basement(i.e. Gym) for about a month and a half, but the end result is a very clean, organized garage that is "my" place...
Most rough-framed garages aren’t ready for drywall. Your garage may be missing studs at the corners and attachment points for the ceiling drywall. To see where framing members may be missing, inspect inside corners where walls meet and where the walls meet the ceiling. These are the most common areas needing additional framing. These two photos show how to add ceiling blocking.
The floors of your new space are a unique issue. Your garage is built with drainage in mind. Code requirements mandate that the concrete slab has a slope built into it to ensure water drains away from the home. The installation of the subfloor will correct the slope issue of your floor. Using a subfloor allows your new space to be converted back into a garage should the next home owner wish to do so.
A garage can be so much more than a messy catch-all for items that don’t fit inside the home. Through a remodel, it can be made into an organized storage unit or a workshop, or simply made more functional, with room for at least one car. Turning a standard 600-square-foot, two-car garage into a well-organized, tidy space is less expensive than most remodeling projects. Because a garage already has a floor, walls and a roof, the primary tasks are finishing the framed walls and adding organizational systems.
Larger projects might entail hiring an architect or structural engineer. If you're having trouble deciding on the specifics of a garage remodel, consider hiring an interior designer. Costs for these professionals vary depending on their experience and level of involvement in the project; you could pay a few hundred dollars for a one-time consultation or several thousand dollars for beginning to end involvement.
Your garage remodeling project is almost always an expensive endeavor. Take the time to find ways to save money on your garage remodel. Every remodel is a unique project. The costs can be something that easily overwhelm your idea. Your garage remodeling project can benefit from some basic ways to save money. There are cost savings that can be found in almost every aspect of your project.
Naturally, you have to know the cost of these things in order to calculate what you can afford to spend. That’s also the best way to ensure that you don’t stumble across any unwelcome surprises during the execution of your project. Using our free estimate for your garage remodel will help you create a realistic budget that actually meets your needs!
If you're planning to maximize the space, add useful features, and otherwise make changes that are likely to appeal to a majority of homeowners, your renovation may end up being a worthwhile investment in your home's resale value. However, the quality of the work matters, especially if you're planning a major change such as converting the garage into a bedroom. Trading your garage space for a poorly insulated "bedroom" with no windows and the garage door intact won't do much to boost resale value.
Dots remodeling did an awesome job painting our house. We had lots of estimates but none of them seem to care about our project as much as Dots. Our house is very large with multiple colors. Dots and his crew handled it with ease. I was very impressed with his work ethic. he kept us informed, cleaned up at the end of each day and the paint job looks Fabulous!! I highly recommend Dotsemodeling
Waterproof paint (for concrete walls) • Paint (dry wall) • Behr concrete cleaner (2 Gal) • Behr Concrete Etcher (2 Gal) • Behr Concrete Bonding Primer (1 Gal) • Behr 1-Part Epoxy Paint (2 Gal.) • MiscPainting Supplies • Stainless steel light switch/receptical covers • Lumber for cabinet over circuit breakers • Gladiator Garage Works workbench-Wall cabinets-tall cabinet • Hooks for bicycles/tools • Tapcon masonary drill bits • PVC (to run wires for garage door openers

Homeowners who are used to house paints should have no trouble applying either and cleaning up afterward. First, apply some H&C cleaner degreaser, a mixture of heavy-duty detergent and phosphoric acid. You simply sprinkle it on the garage floor with a watering can, work it in with a broom and let it foam the floor clean. Then, rinse the floor and let it dry. The stain is applied with a roller. It's ready for foot traffic in one hour and car traffic in 72 to 96 hours depending on temperature and humidity.

For a garage-to-utility-room conversion, budget at least $6,000 for appliances, a utility sink, and space for sorting, folding and hanging laundry. A new utility room in place of an old garage brings convenience into your life, especially if you've spent years dragging loads of laundry up and down the stairs. This conversion will cost a bit more due to the addition of plumbing, but it'll be worth it.
×