Like wood stains, masonry stains are less viscous than paints. They soak into the masonry and don't form a film the way paint does. Unlike film-forming coatings, stains won't make your garage floor feel like the deck of an aircraft carrier. Because of this, stains are somewhat more forgiving and easier to apply and reapply as they wear off and become dirty. One of the oldest (perhaps the oldest) masonry stains available is H&C, now owned by Sherwin-Williams and sold at local paint stores. This venerable brand has been used in the Southern U.S. for many years. It's available in a wide range of colors and it can be tinted to any color you prefer. It's available in two formulations: a solvent-base (that is unavailable in California) and a waterborne acrylic available nationwide. The solvent-based formulation is the tougher one, so if you have both available, choose the stronger route unless you're very sensitive to solvent fumes.

This single car garage is another great structure that would be a great addition to any property. Though it only has room for one full-sized vehicle it is still a very functional building. And it also has a side entry door which makes getting in and out of this building convenient. Especially if you decided to use it for a workshop or for additional storage.
Before launching a project, the homeowner should draw up a plan that takes into account the various ways the garage could ideally be used. GarageAbility, for instance, will divide a garage into zones for storing garden equipment, sporting goods and tools as well as space for working on hobbies, then help the homeowner determine the storage systems that will work best for their belongings.
If you have an existing garage in place, but no walls, floor, ceiling or finishes in place, the cost to finish your garage will be much less expensive than $10,000. Oftentimes, finished a garage entails adding a few beams or drywall. Contractors can install wooden or steal beams for a few thousand dollars. In addition, according to our drywall installation cost guide, you can purchase drywall for at little as $0.30/sf. If you hire a general contractor to install the drywall, expect to pay another $1,000. Overall, the cost to finish a garage should not exceed $5,000.
Hiring a remodeling expert really is necessary. A professional will ensure that all building permits and inspections are up to date. They can also redo your garage space to make it more appealing -- both visually and functionally. Garages are an important consideration for homebuyers when deciding whether to buy a property. Displaying a professional finish can go a long way in helping you get the best price possible for your home.
Garages have minimal insulation, so if you’re renovating your garage to turn it into an office or family room, you’ll certainly need to add insulation and HVAC. Your insulation pro will start with the ceilings and floors. Beyond that, they may or may not choose to add insulated garage doors (if doors are being kept). All in all, adding new HVAC and insulation can add $2,000 to $3,000 to your garage remodel cost.
With most garage renovations, flooring is usually the prime focus. Many garages are made entirely of concrete and brick work, and replacing or repairing concrete can be very costly. In cases where the floor or walls are severely damaged, a concrete mason must be called. In this scenario, materials come at a low cost, but working with concrete is very time consuming, which can lead to a large labor bill.
If the concrete slab in the garage is the problem, there are more cost-effective solutions than a concrete mason. Most cracking, flaking, stains, pitting or wear can be easily fixed by calling a concrete specialist to apply either an inexpensive epoxy or polyurethane-based coating. These seals are very durable and can make your garage floor look brand new.
Waterproof paint (for concrete walls) • Paint (dry wall) • Behr concrete cleaner (2 Gal) • Behr Concrete Etcher (2 Gal) • Behr Concrete Bonding Primer (1 Gal) • Behr 1-Part Epoxy Paint (2 Gal.) • MiscPainting Supplies • Stainless steel light switch/receptical covers • Lumber for cabinet over circuit breakers • Gladiator Garage Works workbench-Wall cabinets-tall cabinet • Hooks for bicycles/tools • Tapcon masonary drill bits • PVC (to run wires for garage door openers
The first step is often fixing a cracked floor or leveling it, and sometimes even staining it to make it look more attractive; the repairs cost $500-$12,500, and stains range from $2 to $10 per square foot. Drywall is typically put up, which costs from $1 to $2 per square foot. Adding boards for a storage space above the garage typically costs about $2 per square foot.
Paint manufacturers have recognized these problems and have come to the rescue with new solutions. But a word of advice: If your garage floor sees heavy water leakage, if it's badly cracked or if it's damp and slimy all summer, don't apply any coating. In those cases, you're better off simply keeping it as clean as you can and then calling it quits.
×