If you don’t want to spend $10,000 on a garage remodel, you could partially finish your garage. You can frame a concrete garage the same way you you’d finish a basement. Wooden crossbeams are secured to the floor, and the remainder of the framing is built up from there. Walls of either paneling or sheetrock can then be fastened, making your garage look and feel like another room of the house. Sheetrock is very often used for garage ceilings, allowing you to choose a paint color, and the same can be said for the walls. This is a job any general contractor can accomplish for a few thousand dollars. You could use metal studs, as opposed to wood, when framing to cut down material costs significantly.
Don’t make the mistake of beginning your garage remodel before you know the basics. Learn how to do it right instead of just diving in. There are many reasons that home owners want to remodel their garage. It is often more difficult to put an addition onto a home than it is to use your garage. Perhaps your parents need a place to enjoy their golden years. Or your kids may be staying home longer than expected.
Every city has certain building codes all homes must follow. One popular item many homeowners have to add when they convert their garage into a living area or bedroom is a new window. Building codes require living spaces to have a window large enough for a person to crawl out of in case of an emergency. Single window installation costs start at $1,200.
And you really need your investments protected, but you just don’t have the funds to build some of these other options. Well, don’t give up hope. This video shows you how to build a pretty decent structure that will do what you need it to do for basically no money. And honestly, if you have the materials on hand it could actually be built for free.
One of the main ways to succeed on a budget is to be organized and have a good plan. Having a good plan means knowing exactly what you want out of it. This requires you to decide everything from paint colors to trim style before the first nail is driven. Having a well thought out plan means knowing where you are getting materials from, and when they will be delivered. This plan is the bedrock that your budget friendly remodel will rest on.
Like wood stains, masonry stains are less viscous than paints. They soak into the masonry and don't form a film the way paint does. Unlike film-forming coatings, stains won't make your garage floor feel like the deck of an aircraft carrier. Because of this, stains are somewhat more forgiving and easier to apply and reapply as they wear off and become dirty. One of the oldest (perhaps the oldest) masonry stains available is H&C, now owned by Sherwin-Williams and sold at local paint stores. This venerable brand has been used in the Southern U.S. for many years. It's available in a wide range of colors and it can be tinted to any color you prefer. It's available in two formulations: a solvent-base (that is unavailable in California) and a waterborne acrylic available nationwide. The solvent-based formulation is the tougher one, so if you have both available, choose the stronger route unless you're very sensitive to solvent fumes.
If the concrete slab in the garage is the problem, there are more cost-effective solutions than a concrete mason. Most cracking, flaking, stains, pitting or wear can be easily fixed by calling a concrete specialist to apply either an inexpensive epoxy or polyurethane-based coating. These seals are very durable and can make your garage floor look brand new.