Start by insulating the walls. Buy unfaced R-13 batts for 2×4 walls and unfaced R-19 batts for 2×6 walls. Match the width of the batt (15-1/4 in. or 23-1/4 in.) to the stud space. Cut batts carefully for a tight fit. Next, staple 4-mil poly to the walls and ceiling. Embed the poly sheeting in caulk around the perimeter of each piece to create an airtight seal. Seal the seams between sheets and seal the poly to electrical boxes with caulk or special sheathing tape (it’s typically red and looks like packing tape).
Waterproof paint (for concrete walls) • Paint (dry wall) • Behr concrete cleaner (2 Gal) • Behr Concrete Etcher (2 Gal) • Behr Concrete Bonding Primer (1 Gal) • Behr 1-Part Epoxy Paint (2 Gal.) • MiscPainting Supplies • Stainless steel light switch/receptical covers • Lumber for cabinet over circuit breakers • Gladiator Garage Works workbench-Wall cabinets-tall cabinet • Hooks for bicycles/tools • Tapcon masonary drill bits • PVC (to run wires for garage door openers
If you have an existing garage in place, but no walls, floor, ceiling or finishes in place, the cost to finish your garage will be much less expensive than $10,000. Oftentimes, finished a garage entails adding a few beams or drywall. Contractors can install wooden or steal beams for a few thousand dollars. In addition, according to our drywall installation cost guide, you can purchase drywall for at little as $0.30/sf. If you hire a general contractor to install the drywall, expect to pay another $1,000. Overall, the cost to finish a garage should not exceed $5,000.

If you have an existing garage in place, but no walls, floor, ceiling or finishes in place, the cost to finish your garage will be much less expensive than $10,000. Oftentimes, finished a garage entails adding a few beams or drywall. Contractors can install wooden or steal beams for a few thousand dollars. In addition, according to our drywall installation cost guide, you can purchase drywall for at little as $0.30/sf. If you hire a general contractor to install the drywall, expect to pay another $1,000. Overall, the cost to finish a garage should not exceed $5,000.

The truth abut garage remodel ideas that increase home value is that there are many to choose from. There are some ideas that increase home value, as well as overall home remodeling ideas that do the same. The trick is finding the ones that will work for your home. Not every idea will work for every home. Always take into account how everything in your home fits together, and use the ideas that work best for your specific situation.
Homeowners who are used to house paints should have no trouble applying either and cleaning up afterward. First, apply some H&C cleaner degreaser, a mixture of heavy-duty detergent and phosphoric acid. You simply sprinkle it on the garage floor with a watering can, work it in with a broom and let it foam the floor clean. Then, rinse the floor and let it dry. The stain is applied with a roller. It's ready for foot traffic in one hour and car traffic in 72 to 96 hours depending on temperature and humidity.
The home office will cost at least $5,000, making it one of the more affordable options when it comes to converting your garage into living space. Like a bedroom, a home office needs all the basic amenities, such as walls, floors, and a ceiling. It needs climate control and a window. This room may also require additional outlets that let you connect computers, printers and charging stations. You'll need internet access and a high-speed connection, as well as lots of storage and organization options.
With its 3D Warehouse and simple user interface, you can certainly be on your way to designing a SketchUp project within minutes. However, If you’re a newbie or have a more complex vision, SketchUp’s own learning center is a great place to start, with several handy video tutorials. There are also lots of user-created SketchUp tutorial videos on YouTube. And if you’re really serious, there are third-party SketchUp training programs available, too.
When it comes to garage insulation, homeowners have two options. Foil insulation (pictured above), tends to look like foil, but the inside is usually laced with heavy-duty polyethylene. The polyethylene is usually used in rigid sheets that are placed inside the cavities of your garage door. Once placed onto the garage, the polyethylene expands to fit into place.
If the concrete slab in the garage is the problem, there are more cost-effective solutions than a concrete mason. Most cracking, flaking, stains, pitting or wear can be easily fixed by calling a concrete specialist to apply either an inexpensive epoxy or polyurethane-based coating. These seals are very durable and can make your garage floor look brand new.
×