Add between $75 and $500 to your budget for the cost of outlet installation. Most garages have electricity of some sort, even if it's just a bare bulb in the ceiling and a few outlets spaced around the walls. If you're trying to convert your garage into living space, you'll need a nearby licensed electrician to add more wiring and outlets for additional electrical devices.
Like wood stains, masonry stains are less viscous than paints. They soak into the masonry and don't form a film the way paint does. Unlike film-forming coatings, stains won't make your garage floor feel like the deck of an aircraft carrier. Because of this, stains are somewhat more forgiving and easier to apply and reapply as they wear off and become dirty. One of the oldest (perhaps the oldest) masonry stains available is H&C, now owned by Sherwin-Williams and sold at local paint stores. This venerable brand has been used in the Southern U.S. for many years. It's available in a wide range of colors and it can be tinted to any color you prefer. It's available in two formulations: a solvent-base (that is unavailable in California) and a waterborne acrylic available nationwide. The solvent-based formulation is the tougher one, so if you have both available, choose the stronger route unless you're very sensitive to solvent fumes.
The overhead garage door can be a big source of drafts and heat loss. Recently installed doors usually include a weather-stripped stop around the perimeter. But older doors may be lacking a weather strip. Luckily, it’s an easy fix. Garage door weather stripping is available at home centers and hardware stores, and installation is straightforward. If your overhead door is uninsulated, search online for “garage door insulating kits.”
Hiring a remodeling expert really is necessary. A professional will ensure that all building permits and inspections are up to date. They can also redo your garage space to make it more appealing -- both visually and functionally. Garages are an important consideration for homebuyers when deciding whether to buy a property. Displaying a professional finish can go a long way in helping you get the best price possible for your home.
A garage remodel is usually much cheaper than a home renovation because the foundation, roof, and walls are already built. Many garages also have electrical and plumbing installed to some extent. The actual cost of a garage remodeling project, however, depends on what the renovated space will be used for. While a new home gym won't require much in the way of amenities, converting a garage to an office, apartment, or bedroom requires adding significantly more creature comforts.
The cost to finish a garage is often less than the cost of a remodel, coming in at an average of about $5,000. Finishes should factor high on your list of materials before you ever begin your garage conversion. The answers to the following questions will go far in determining your budget. Low-end finishes will save you big bucks at the time of renovation, but high-end finishes will help recoup your ROI when it comes time to sell.
If you have an existing garage in place, but no walls, floor, ceiling or finishes in place, the cost to finish your garage will be much less expensive than $10,000. Oftentimes, finished a garage entails adding a few beams or drywall. Contractors can install wooden or steal beams for a few thousand dollars. In addition, according to our drywall installation cost guide, you can purchase drywall for at little as $0.30/sf. If you hire a general contractor to install the drywall, expect to pay another $1,000. Overall, the cost to finish a garage should not exceed $5,000.
One of the biggest impacts you can make to a refreshed garage has little to do with the garage itself: Add containers potted with pretty blooms. The planters help to soften the edges between structure and landscape and add pops of visual interest to what is often a neutral facade. Here, miniature trellises up the columns add even more growing spots, with delicate vines that clamor up toward the pergola. Another idea: Use hanging baskets on either side of a garage’s door.
Pick: Pick what your new room is going to focus on. Your small garage can either do one thing perfectly or a lot of things partially. Think of it like any small room in your home. Your small bedroom wouldn’t be able to be a bedroom, media room, work space, and storage area. Your small garage can’t do all of these things either. So pick one focus and ensure your plan addresses it. Some average room sizes to help you pick are:
I just finished "re-modeling" my garage...before I touched it it had just taped drywall and concrete block walls, unfinished cement floor, wires for the garage door openers hanging all over the place, holes in all the walls/ceiling. It was a typical, dirty, dark garage.I painted the concrete walls with Behr waterproof masonry paint and the rest of the walls and ceiling with the same color behr paint (twilight gray-to lighten it up).I did the floor with Behr 1 Part Epoxy, which, takes forever to prep for, but the result is worth it. You first need to sweep very good, then clean/de-grease and etch the concrete using a floor cleaner rented from HD...then let it dry. I let it dry for about 2 weeks. Once I was sure the concrete was dry, I applied 2 coats of concrete bonding primer. I let that dry for about 24 hours, and I was finally ready for the paint. The paint goes on easy, one coat was plenty. I sprinlled in some color flakes and let it dry 24hrs. I then began my first of three coates of low gloss sealer. The finished result was very pleasing...I then re-installed my Gladiator Garage Works 8 foot work bench, wall cabinet and tool chest as well as a second wall cabinet and large gearbox that I purchased for my new garage... I also built a wooden cabinet around the circuit breakers and painted it gray along with the framing for the garage doors, a beam in the middle and the door into the house. I finished with gray vinyl trim molding around the walls.I also mounted the bikes, a shop Vac and misc. brooms, saw horse, etc... on the wall(s). All of the wires from the garage door openers were hanging down and sloppy (prev. owner) so I disconected everything and ran it through PVC for a cleaner look. I then added a few finishing touches, Bud Light neon clock, pictures (NE Patriots Cheerleaders), and mounted my novelty license plate collection as well as a few other items...Moving all of my furniture/tools out of the garage was a big project in itself, and I lost my basement(i.e. Gym) for about a month and a half, but the end result is a very clean, organized garage that is "my" place...
Homeowners who are used to house paints should have no trouble applying either and cleaning up afterward. First, apply some H&C cleaner degreaser, a mixture of heavy-duty detergent and phosphoric acid. You simply sprinkle it on the garage floor with a watering can, work it in with a broom and let it foam the floor clean. Then, rinse the floor and let it dry. The stain is applied with a roller. It's ready for foot traffic in one hour and car traffic in 72 to 96 hours depending on temperature and humidity.
Leaky doors and windows let in uncomfortable drafts and increase heating and cooling costs. Check your garage service door to be sure it has good weather stripping and a threshold that seals tightly to the bottom of the door. In most cases, if your service door is missing a threshold and weather stripping, it’s more efficient to replace the door with a new, weather-tight version. You can buy an inexpensive prehung metal exterior door at home centers and lumberyards.
I just finished "re-modeling" my garage...before I touched it it had just taped drywall and concrete block walls, unfinished cement floor, wires for the garage door openers hanging all over the place, holes in all the walls/ceiling. It was a typical, dirty, dark garage.I painted the concrete walls with Behr waterproof masonry paint and the rest of the walls and ceiling with the same color behr paint (twilight gray-to lighten it up).I did the floor with Behr 1 Part Epoxy, which, takes forever to prep for, but the result is worth it. You first need to sweep very good, then clean/de-grease and etch the concrete using a floor cleaner rented from HD...then let it dry. I let it dry for about 2 weeks. Once I was sure the concrete was dry, I applied 2 coats of concrete bonding primer. I let that dry for about 24 hours, and I was finally ready for the paint. The paint goes on easy, one coat was plenty. I sprinlled in some color flakes and let it dry 24hrs. I then began my first of three coates of low gloss sealer. The finished result was very pleasing...I then re-installed my Gladiator Garage Works 8 foot work bench, wall cabinet and tool chest as well as a second wall cabinet and large gearbox that I purchased for my new garage... I also built a wooden cabinet around the circuit breakers and painted it gray along with the framing for the garage doors, a beam in the middle and the door into the house. I finished with gray vinyl trim molding around the walls.I also mounted the bikes, a shop Vac and misc. brooms, saw horse, etc... on the wall(s). All of the wires from the garage door openers were hanging down and sloppy (prev. owner) so I disconected everything and ran it through PVC for a cleaner look. I then added a few finishing touches, Bud Light neon clock, pictures (NE Patriots Cheerleaders), and mounted my novelty license plate collection as well as a few other items...Moving all of my furniture/tools out of the garage was a big project in itself, and I lost my basement(i.e. Gym) for about a month and a half, but the end result is a very clean, organized garage that is "my" place...
Dots remodeling did an awesome job painting our house. We had lots of estimates but none of them seem to care about our project as much as Dots. Our house is very large with multiple colors. Dots and his crew handled it with ease. I was very impressed with his work ethic. he kept us informed, cleaned up at the end of each day and the paint job looks Fabulous!! I highly recommend Dotsemodeling
The floors of your new space are a unique issue. Your garage is built with drainage in mind. Code requirements mandate that the concrete slab has a slope built into it to ensure water drains away from the home. The installation of the subfloor will correct the slope issue of your floor. Using a subfloor allows your new space to be converted back into a garage should the next home owner wish to do so.
Homeowners who are used to house paints should have no trouble applying either and cleaning up afterward. First, apply some H&C cleaner degreaser, a mixture of heavy-duty detergent and phosphoric acid. You simply sprinkle it on the garage floor with a watering can, work it in with a broom and let it foam the floor clean. Then, rinse the floor and let it dry. The stain is applied with a roller. It's ready for foot traffic in one hour and car traffic in 72 to 96 hours depending on temperature and humidity.
Add between $75 and $500 to your budget for the cost of outlet installation. Most garages have electricity of some sort, even if it's just a bare bulb in the ceiling and a few outlets spaced around the walls. If you're trying to convert your garage into living space, you'll need a nearby licensed electrician to add more wiring and outlets for additional electrical devices.

And you really need your investments protected, but you just don’t have the funds to build some of these other options. Well, don’t give up hope. This video shows you how to build a pretty decent structure that will do what you need it to do for basically no money. And honestly, if you have the materials on hand it could actually be built for free.
Paint manufacturers have recognized these problems and have come to the rescue with new solutions. But a word of advice: If your garage floor sees heavy water leakage, if it's badly cracked or if it's damp and slimy all summer, don't apply any coating. In those cases, you're better off simply keeping it as clean as you can and then calling it quits.
×