When it comes to garage insulation, homeowners have two options. Foil insulation (pictured above), tends to look like foil, but the inside is usually laced with heavy-duty polyethylene. The polyethylene is usually used in rigid sheets that are placed inside the cavities of your garage door. Once placed onto the garage, the polyethylene expands to fit into place.
Every project comes down to cost, so it only makes sense to start there. According to our garage remodeling cost estimator, the average garage remodel runs $8,582. Keep in mind, this takes the full garage into consideration. That includes the garage door, flooring, windows and plenty of other renovations. For those remodeling one aspect of their garage, of course, expect the final price to be much less. In fact, we have even seen garage remodels cost as low as $900.
Add between $75 and $500 to your budget for the cost of outlet installation. Most garages have electricity of some sort, even if it's just a bare bulb in the ceiling and a few outlets spaced around the walls. If you're trying to convert your garage into living space, you'll need a nearby licensed electrician to add more wiring and outlets for additional electrical devices.

But about those new formulations, one is Epoxy Shield garage floor paint. It's a waterborne coating consisting of epoxy and acrylic resins with color chips that you sprinkle over while the coating is wet. Its manufacturer says it’s specifically formulated to withstand hot-tire pickup, moisture vapor and attack by solvents and chemicals that drip from a car or come in on the car's tires. It comes as a kit that consists of a cleaner-degreaser, two paint components that you mix together and nonskid color chips. To apply, first clean and degrease the floor. Then mix the two-part coating together and roll it on. Finish up by broadcasting the nonskid chips onto the coating while it’s still wet. You should be able to walk on the surface in four hours and drive on it after seven days when it’s fully cured. The kit costs about $60.
The overhead garage door can be a big source of drafts and heat loss. Recently installed doors usually include a weather-stripped stop around the perimeter. But older doors may be lacking a weather strip. Luckily, it’s an easy fix. Garage door weather stripping is available at home centers and hardware stores, and installation is straightforward. If your overhead door is uninsulated, search online for “garage door insulating kits.”
We are extremely satisfied with our choice to use Dots Remodeling. We spent several days looking at colors where they presented multiple options for us to choose from. They are professional and very patient as they worked. on our exterior house paint job. Not only did they meet the expectations set by neighbors who had worked with them in the past, they also went above and beyond to exceed them. From start to finish, Dots demonstrated their professionalism, expertise, customer service, and true passion for their business. It is clear that their true purpose is to ensure their client���s complete satisfaction. They put in the time, effort, and energy to ensure that they accomplish this goal.

If the concrete slab in the garage is the problem, there are more cost-effective solutions than a concrete mason. Most cracking, flaking, stains, pitting or wear can be easily fixed by calling a concrete specialist to apply either an inexpensive epoxy or polyurethane-based coating. These seals are very durable and can make your garage floor look brand new.

×