I just finished "re-modeling" my garage...before I touched it it had just taped drywall and concrete block walls, unfinished cement floor, wires for the garage door openers hanging all over the place, holes in all the walls/ceiling. It was a typical, dirty, dark garage.I painted the concrete walls with Behr waterproof masonry paint and the rest of the walls and ceiling with the same color behr paint (twilight gray-to lighten it up).I did the floor with Behr 1 Part Epoxy, which, takes forever to prep for, but the result is worth it. You first need to sweep very good, then clean/de-grease and etch the concrete using a floor cleaner rented from HD...then let it dry. I let it dry for about 2 weeks. Once I was sure the concrete was dry, I applied 2 coats of concrete bonding primer. I let that dry for about 24 hours, and I was finally ready for the paint. The paint goes on easy, one coat was plenty. I sprinlled in some color flakes and let it dry 24hrs. I then began my first of three coates of low gloss sealer. The finished result was very pleasing...I then re-installed my Gladiator Garage Works 8 foot work bench, wall cabinet and tool chest as well as a second wall cabinet and large gearbox that I purchased for my new garage... I also built a wooden cabinet around the circuit breakers and painted it gray along with the framing for the garage doors, a beam in the middle and the door into the house. I finished with gray vinyl trim molding around the walls.I also mounted the bikes, a shop Vac and misc. brooms, saw horse, etc... on the wall(s). All of the wires from the garage door openers were hanging down and sloppy (prev. owner) so I disconected everything and ran it through PVC for a cleaner look. I then added a few finishing touches, Bud Light neon clock, pictures (NE Patriots Cheerleaders), and mounted my novelty license plate collection as well as a few other items...Moving all of my furniture/tools out of the garage was a big project in itself, and I lost my basement(i.e. Gym) for about a month and a half, but the end result is a very clean, organized garage that is "my" place...

Besides a brand new room, there are plenty of other benefits that come with remodeling garages. First and foremost, if you simply update your garage with new flooring, windows, insulation or garage organizers, you instantly increase the value of your home. While you may not see a 100% return on investment the day you sale, you will surely get more than you would have before the garage renovation.


Waterproof paint (for concrete walls) • Paint (dry wall) • Behr concrete cleaner (2 Gal) • Behr Concrete Etcher (2 Gal) • Behr Concrete Bonding Primer (1 Gal) • Behr 1-Part Epoxy Paint (2 Gal.) • MiscPainting Supplies • Stainless steel light switch/receptical covers • Lumber for cabinet over circuit breakers • Gladiator Garage Works workbench-Wall cabinets-tall cabinet • Hooks for bicycles/tools • Tapcon masonary drill bits • PVC (to run wires for garage door openers
Start by insulating the walls. Buy unfaced R-13 batts for 2×4 walls and unfaced R-19 batts for 2×6 walls. Match the width of the batt (15-1/4 in. or 23-1/4 in.) to the stud space. Cut batts carefully for a tight fit. Next, staple 4-mil poly to the walls and ceiling. Embed the poly sheeting in caulk around the perimeter of each piece to create an airtight seal. Seal the seams between sheets and seal the poly to electrical boxes with caulk or special sheathing tape (it’s typically red and looks like packing tape).
I just finished "re-modeling" my garage...before I touched it it had just taped drywall and concrete block walls, unfinished cement floor, wires for the garage door openers hanging all over the place, holes in all the walls/ceiling. It was a typical, dirty, dark garage.I painted the concrete walls with Behr waterproof masonry paint and the rest of the walls and ceiling with the same color behr paint (twilight gray-to lighten it up).I did the floor with Behr 1 Part Epoxy, which, takes forever to prep for, but the result is worth it. You first need to sweep very good, then clean/de-grease and etch the concrete using a floor cleaner rented from HD...then let it dry. I let it dry for about 2 weeks. Once I was sure the concrete was dry, I applied 2 coats of concrete bonding primer. I let that dry for about 24 hours, and I was finally ready for the paint. The paint goes on easy, one coat was plenty. I sprinlled in some color flakes and let it dry 24hrs. I then began my first of three coates of low gloss sealer. The finished result was very pleasing...I then re-installed my Gladiator Garage Works 8 foot work bench, wall cabinet and tool chest as well as a second wall cabinet and large gearbox that I purchased for my new garage... I also built a wooden cabinet around the circuit breakers and painted it gray along with the framing for the garage doors, a beam in the middle and the door into the house. I finished with gray vinyl trim molding around the walls.I also mounted the bikes, a shop Vac and misc. brooms, saw horse, etc... on the wall(s). All of the wires from the garage door openers were hanging down and sloppy (prev. owner) so I disconected everything and ran it through PVC for a cleaner look. I then added a few finishing touches, Bud Light neon clock, pictures (NE Patriots Cheerleaders), and mounted my novelty license plate collection as well as a few other items...Moving all of my furniture/tools out of the garage was a big project in itself, and I lost my basement(i.e. Gym) for about a month and a half, but the end result is a very clean, organized garage that is "my" place...
We first used Crown Exteriors 2 years ago to repair some wood siding and do external painting. We were very happy with the end result that we decided to use them again when we needed windows replaced now. They are reliable and do what they say they will. In addition, they are reasonably priced and just do great work for the cost. Would use them again if we have another need arise.

Flooring: Concrete slabs are cold, hard, and not very pretty to the eyes. Even if you’re on a tight budget, installing new floors during your garage conversion could be worth your while in terms of comfort and aesthetics. Vinyl flooring is one of the more cost-effective options and is available in many different designs made to look like wood, tile, or natural stone. If the space is framed in and moisture isn’t a concern, carpet is also a viable option for softer flooring as long as insulation occurs beforehand.
And you really need your investments protected, but you just don’t have the funds to build some of these other options. Well, don’t give up hope. This video shows you how to build a pretty decent structure that will do what you need it to do for basically no money. And honestly, if you have the materials on hand it could actually be built for free.
×