Waterproof paint (for concrete walls) • Paint (dry wall) • Behr concrete cleaner (2 Gal) • Behr Concrete Etcher (2 Gal) • Behr Concrete Bonding Primer (1 Gal) • Behr 1-Part Epoxy Paint (2 Gal.) • MiscPainting Supplies • Stainless steel light switch/receptical covers • Lumber for cabinet over circuit breakers • Gladiator Garage Works workbench-Wall cabinets-tall cabinet • Hooks for bicycles/tools • Tapcon masonary drill bits • PVC (to run wires for garage door openers
With most garage renovations, flooring is usually the prime focus. Many garages are made entirely of concrete and brick work, and replacing or repairing concrete can be very costly. In cases where the floor or walls are severely damaged, a concrete mason must be called. In this scenario, materials come at a low cost, but working with concrete is very time consuming, which can lead to a large labor bill.
If the concrete slab in the garage is the problem, there are more cost-effective solutions than a concrete mason. Most cracking, flaking, stains, pitting or wear can be easily fixed by calling a concrete specialist to apply either an inexpensive epoxy or polyurethane-based coating. These seals are very durable and can make your garage floor look brand new.
The floors of your new space are a unique issue. Your garage is built with drainage in mind. Code requirements mandate that the concrete slab has a slope built into it to ensure water drains away from the home. The installation of the subfloor will correct the slope issue of your floor. Using a subfloor allows your new space to be converted back into a garage should the next home owner wish to do so.
If you don’t want to spend $10,000 on a garage remodel, you could partially finish your garage. You can frame a concrete garage the same way you you’d finish a basement. Wooden crossbeams are secured to the floor, and the remainder of the framing is built up from there. Walls of either paneling or sheetrock can then be fastened, making your garage look and feel like another room of the house. Sheetrock is very often used for garage ceilings, allowing you to choose a paint color, and the same can be said for the walls. This is a job any general contractor can accomplish for a few thousand dollars. You could use metal studs, as opposed to wood, when framing to cut down material costs significantly.
Homeowners who are used to house paints should have no trouble applying either and cleaning up afterward. First, apply some H&C cleaner degreaser, a mixture of heavy-duty detergent and phosphoric acid. You simply sprinkle it on the garage floor with a watering can, work it in with a broom and let it foam the floor clean. Then, rinse the floor and let it dry. The stain is applied with a roller. It's ready for foot traffic in one hour and car traffic in 72 to 96 hours depending on temperature and humidity.
Before launching a project, the homeowner should draw up a plan that takes into account the various ways the garage could ideally be used. GarageAbility, for instance, will divide a garage into zones for storing garden equipment, sporting goods and tools as well as space for working on hobbies, then help the homeowner determine the storage systems that will work best for their belongings.
Add between $75 and $500 to your budget for the cost of outlet installation. Most garages have electricity of some sort, even if it's just a bare bulb in the ceiling and a few outlets spaced around the walls. If you're trying to convert your garage into living space, you'll need a nearby licensed electrician to add more wiring and outlets for additional electrical devices.
For a garage-to-utility-room conversion, budget at least $6,000 for appliances, a utility sink, and space for sorting, folding and hanging laundry. A new utility room in place of an old garage brings convenience into your life, especially if you've spent years dragging loads of laundry up and down the stairs. This conversion will cost a bit more due to the addition of plumbing, but it'll be worth it.