Your garage remodeling project isn’t necessarily the easiest endeavor. Too often a homeowner will just forge ahead with a great idea and hope it turns our alright. Needless to say, this is not often the case, most remodels do not go easily. Even if you think of a good plan, it probably is missing something. Trust us, unless you are a professional contractor, you haven’t thought of everything. Our tips will make you look like you have done this a thousand times.
Like wood stains, masonry stains are less viscous than paints. They soak into the masonry and don't form a film the way paint does. Unlike film-forming coatings, stains won't make your garage floor feel like the deck of an aircraft carrier. Because of this, stains are somewhat more forgiving and easier to apply and reapply as they wear off and become dirty. One of the oldest (perhaps the oldest) masonry stains available is H&C, now owned by Sherwin-Williams and sold at local paint stores. This venerable brand has been used in the Southern U.S. for many years. It's available in a wide range of colors and it can be tinted to any color you prefer. It's available in two formulations: a solvent-base (that is unavailable in California) and a waterborne acrylic available nationwide. The solvent-based formulation is the tougher one, so if you have both available, choose the stronger route unless you're very sensitive to solvent fumes.
Flooring: Concrete slabs are cold, hard, and not very pretty to the eyes. Even if you’re on a tight budget, installing new floors during your garage conversion could be worth your while in terms of comfort and aesthetics. Vinyl flooring is one of the more cost-effective options and is available in many different designs made to look like wood, tile, or natural stone. If the space is framed in and moisture isn’t a concern, carpet is also a viable option for softer flooring as long as insulation occurs beforehand.

On the exterior we remove the siding on the front of the garage and installed new hardboard siding that matched the original on the building. Electrically we removed and relocated existing lights and added a ceiling fan as well as recessed lighting. Some additional outlets and network wiring was installed then connected to the home and panel box. The interior was insulated in areas such as the ceiling, stairwell and miscellaneous sections of the walls. We laminated (overlay) the existing sheetrock with 3/8″ wallboard on the sidewalls and stairwell and 1/2″ for the ceiling.
If you decide to expand your garage to make more room for tools or storage, this is considered adding on to your home, and costs will typically go up. Home addition costs fall between $20,000 and $70,000 for most homeowners, depending on the size and type of space built. Your contractor will frame out new walls and expand the room's foundation. If you intend to keep the space the same only reorganizing it, you may have only the costs associated with purchasing and installing shelving and cabinetry.
Most unfinished garages have the bare minimum of outlets and lights, so you’ll want to add a few. And in some cases, you’ll have to reroute wiring that’s attached to the face of studs or the underside of ceiling framing. We had to reroute phone wires, door opener control wires and plastic-sheathed cable in our garage. Remove surface-mounted wiring and move it into the stud space, or reroute it over the top of the ceiling joists or trusses.
Did you now that the garage is one of the biggest uninsulated areas of the home? Improperly insulated garage doors can vastly increase your heating and electric bills. Even worse, they can cause moisture damage once it rains or an uncomfortable setting every time you enter. Therefore, garage insulation tends to creep up with all garage remodeling projects, especially those concerning a finished garage.

Every city has certain building codes all homes must follow. One popular item many homeowners have to add when they convert their garage into a living area or bedroom is a new window. Building codes require living spaces to have a window large enough for a person to crawl out of in case of an emergency. Single window installation costs start at $1,200.
Wall Units: If you have a big enough garage, wall units for storage can make your garage a great selling point. This can be a project you do yourself for a few hundred dollars. If you are not a do-it-yourself sort of person look for options that don’t have the look of interior cabinetry. Select cabinets that look like they belong there.  The cost for garage cabinets ranges from a few hundred to a few thousand dollars.

Note: Here’s how we can help: 24hplans has team of highly-trained, professional architects and drafters who can prepare any kind of site plan in the shortest amount of time possible, so that you can easily obtain that building permit and get on with your project. Use the promotion code: 24hplans-20off to get a 20% discount off any package. — Please note this is a limited time offer, exclusive to the readers of our blog. This offer is not being advertised anywhere else.


Did you now that the garage is one of the biggest uninsulated areas of the home? Improperly insulated garage doors can vastly increase your heating and electric bills. Even worse, they can cause moisture damage once it rains or an uncomfortable setting every time you enter. Therefore, garage insulation tends to creep up with all garage remodeling projects, especially those concerning a finished garage.
×